Standard Escalator

Standard escalators are designed and manufactured based on the EN115 Europe and the GB16899 China safety code. It can be designed as heavy duty escalator to transport huge amount of passengers, and resists to outdoor environment. The escalator is designed to be safe, reliable and low noise during the run.

  • Installation place: Indoor
  • Transit/running time: 16 hours per day
  • Vertical height: 1.0~10.0m
  • (35 degree, only used for lower~then-6m)
  • Gradient:30/35 degree
  • Step width:600/800/1000mm
  • Horizontal steps: 2/3steps
  • Rated speed:0.5m/s
  • Delivery capacity:3600/4800/6000people per hour
  • Power Supply: Three phase current of 220V/50HZ

Heavy Duty Escalator

Nidec heavy duty escalator allows customization for outdoor and indoor conditions. It ensures the escalator provides comfort and safety to passengers under any environment.

  • Installation place: Indoor/Semi-outdoors/outdoor
  • Transit/running time: 24 hours per day
  • Vertical height: 3.0~24.0m
  • Gradient: 30 degrees
  • Step width: 800/1000mm
  • Horizontal steps: 4 steps
  • Upside curvature radius of escalator steps: 3000mm
  • Rated speed: 0.5m/s,0.65m/s
  • Delivery capacity: (1). 0.5m/s, 4800/6000 people per hour (2). 0.65m/s, 5900/7300 people per hour
  • Power supply: Three phase current of 380V/50HZ
  • Lighting power: Signal phase current of 220 V/50 HZ

Standard Moving Walk

  • Installation place: Indoor/ Semi-outdoors/outdoors
  • Transit/ running time: 24 hours per day
  • Vertical height: 1.0~10.0m
  • Gradient: 10 degrees/11 degrees/12 degrees
  • Step width: 800/1000mm
  • Upside curvature radius of escalator steps: 3500mm
  • Rated speed: 0.5m/s
  • Delivery capacity: 4800/6000 people per hour
  • Power supply: Three phase current of 380V/50HZ
  • Lighting Power: Signal phase current of 220V/50HZ

We have an escalator and autowalk soultion for every building design and layout.